Permit Application - Commercial Irrigation System

Installer Information

*** If this is the company's first time doing work in the District, a PLUMBING PERMIT REGISTRATION FORM must be completed and turned in with this application.

Property Owner Information

Requirements

1. All plumbing must comply with the current Uniform Plumbing Code and TCEQ regulations. Any health hazards found in existing plumbing must be repaired.

2. The tie-in and backflow inspection must be approved by the District's inspector. It is the irrigators responsibility to provide a copy of the backflow test to the District. The inspector's information can be found on the permit.

3. If the prepaid plumbing inspection fails, the above company will receive a bill for the re-inspections. Re-inspection fees are $65.00 each. All re-inspection fees are due 10 days after receiving bill or service will be terminated within the District.

4. A set of plans of the system to be installed must be submitted with the permit application. Any revisions to the plans must be submitted to the District prior to the final inspection.

NOTE: To ensure contamination of the public water does not occur, all back flow prevention devices must be tested upon installation and every 5 years thereafter. All backflow devices that are installed to protect against health hazards must be tested annually. This is to be done by a certified tester and a copy must be filed with Brushy Creek M.U.D. This testing will be at the home owner's expense.











Please SUBMIT below___This section is for Office Use Only